Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Severance, CO

Loading Dock Door Repair in Severance, CO

Dock doors, seals and bumpers repaired to keep shipping moving. Typical cost $300-$1,200.

Loading Dock Door Repair is one of the most common calls we get. A technician will explain what is wrong and what it will cost before starting, and test the door before leaving. Dock doors, seals and bumpers repaired to keep shipping moving.

Safety first: springs and cables hold hundreds of pounds of tension. Don't try to adjust or remove them yourself, and don't run the opener on a door that's crooked or has a broken spring.

Signs you need loading dock door repair

  • A dock door that is damaged or off track
  • Torn dock seals or shelters
  • Broken springs on a dock door
  • Air leaks at the dock

Common causes

  • Trucks and forklifts hitting the door
  • Heavy daily cycles

What you can check yourself

  • Take the dock out of service until the door is safe.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

What happens during the visit

  1. Secure the door
  2. Repair the sections, track, springs or cables
  3. Replace dock seals or bumpers if needed
  4. Adjust the operator
  5. Test it

How much does loading dock door repair cost?

$300-$1,200Typical range, parts & labor
2-4 hoursTypical time on site

What moves the price:

  • Door size, gauge and cycle rating
  • Operator type and controls
  • Parts availability for your model
  • Lift equipment and after-hours access

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Local loading dock door repair for Severance, CO

Large daily temperature swings in Colorado work hinge screws and track bolts loose, which leads to noise, wobble and eventually an off-track door.

Technicians serve all of Severance (ZIP code 80546), plus Windsor (4.2 mi), Eaton (7.4 mi), Greeley (10.2 mi) and Fort Collins (13 mi). Call (833) 435-8883 to book a visit in Severance.

Loading Dock Door Repair: frequently asked questions

How much does loading dock door repair cost in Severance, CO?

Loading Dock Door Repair typically costs $300-$1,200 including parts and labor, and usually takes 2-4 hours. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do loading dock door repair the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is loading dock door repair covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Colorado or Severance requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my commercial door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the commercial door is near the end of its life, replace it. Commercial doors are rated by cycles. If the door has reached its rated cycle life, has several damaged sections, or parts are no longer made, replacing it is often cheaper over the next few years. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Severance, CO

Garaga Off-Track Garage Door Repair

Garaga is a Canadian garage door manufacturer based in Quebec.

Typical $175-$450

Allstar Garage Door Sensor Repair

Allstar openers are no longer made. Replacement remotes and many parts are still available, and we'll tell you when replacing the opener makes more sense.

Typical $100-$250

McKeon Door Rolling Fire Door Inspection & Drop Testing

McKeon makes rolling fire doors, fire curtains and rolling steel doors.

Typical $150-$500

Garage Door Roller Replacement

Worn steel or plastic rollers swapped for quiet, sealed nylon rollers.

Typical $150-$350

Garaga Garage Door Panel Replacement

Garaga is a Canadian garage door manufacturer based in Quebec.

Typical $300-$900

CHI Overhead Doors Garage Door Panel Replacement

CHI Overhead Doors builds residential and commercial sectional doors in Arthur, Illinois, and sells them through independent dealers.

Typical $300-$900

Overhead Door Smart Garage Door Opener Setup

Overhead Door-brand openers come from the same company as Genie, the Overhead Door Corporation.

Typical $100-$900

Amarr Garage Door Installation

Amarr, an ASSA ABLOY Group brand, makes residential lines such as Classica, Heritage, Lucern and Oak Summit, as well as commercial doors.

Typical $1,200-$4,500

Northwest Door Garage Door Repair

Diagnosis and repair for doors that are stuck, noisy, crooked or won't open or close.

Typical $150-$450

Wayne Dalton Extension Spring Replacement

Wayne Dalton is part of the Overhead Door Corporation. Many Wayne Dalton doors use the TorqueMaster spring system, with the springs sealed inside the torsion tube, so spring work needs TorqueMaster parts and a different procedure.

Typical $150-$350

Amarr Garage Door Repair

Amarr, an ASSA ABLOY Group brand, makes residential lines such as Classica, Heritage, Lucern and Oak Summit, as well as commercial doors.

Typical $150-$450

Overhead Door Commercial Door Operator Repair

Trolley, jackshaft and hoist operators repaired and adjusted.

Typical $300-$1,200

Garage door stuck, noisy or broken?

Talk to a garage door technician in Severance, CO now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote